One Big Projector

Can your iPhone, iPad or Mac send video to a projector, and what do you need?

This is the first question anyone asks before buying a projection app, and the web answers it badly. Affiliate pages recommend whatever adapter pays best, forum threads contradict each other, and nobody separates the models that work from the models that do not. Apple publishes the answer on its own tech-spec pages, in a support article about the USB-C connector, in a set of per-chip articles on how many displays each Mac supports, and in its developer documentation. This page quotes those, says which model does what, and names the URL behind every figure.

One thing before the detail, because it is the most common misunderstanding we hear. Your iPhone, iPad or Mac is the source of the picture, not the thing that makes the light. It sends video out over a cable to a real projector, and the projector throws the image on the wall. No Apple device projects anything by itself.

Yes, over a cable, if your device has the right port. Apple states that iPhone 15 and later output video over USB-C "at up to 4K resolution and 60Hz". Lightning iPhones are capped at "Up to 1080p" through Apple's adapter. Every Mac carries video on its Thunderbolt ports, and a MacBook Pro or Mac mini has HDMI built in. You still need an actual projector, and a cable or adapter between them.

The short version

Every iPhone, iPad and Mac Apple has shipped in the last several years can put its picture on an external display over a cable. What changed, and what the arguing online is really about, is the port and the ceiling. The Mac is the roomiest of the three and gets its own table further down, because Apple publishes its display limits per chip rather than per model.

Apple moved the iPhone from Lightning to USB-C with the iPhone 15. That single change is why advice written before 2023 is wrong for new phones and advice written after it is wrong for old ones. A Lightning iPhone needs one of Apple's Lightning adapters and tops out at 1080p. A USB-C iPhone can use an ordinary USB-C to HDMI cable and, in Apple's words, output "at up to 4K resolution and 60Hz".

The iPad crossed the same line earlier and at different times per model line, which is why there is no single answer for iPad at all. The 2018 iPad Pro went USB-C, the iPad Air went USB-C with the 4th generation, the iPad mini with the 6th, and the base iPad with the 10th. The generation before each of those is a Lightning device with a 1080p ceiling.

Then there is a second question underneath the cable question, and it is the one that decides whether a projection app can actually do its job: whether the projector shows a mirror of your screen, with all the app's buttons on the wall, or whether the app drives the display directly and puts a clean full-screen image on it. Apple documents both. They are not the same thing.

Model by model: port, output, and what you need to buy

Every row below comes from Apple's own technical-specification page for that model, or from Apple's support article on the USB-C connector. The "what Apple says it outputs" column uses Apple's wording rather than ours, because the exact phrasing is where the confusion starts.

Note the oddity in the right-hand column for USB-C iPhones: the spec pages name an adapter, but Apple's support article says a plain third-party cable is fine as long as it is HDMI 2.0. Both are Apple statements. The cable is cheaper.

DevicePort Apple listsWhat Apple says it outputs over that portWhat you need
iPhone 11, 12, 13, 14, 14 Pro"Lightning connector""Up to 1080p through Lightning Digital AV Adapter and Lightning to VGA Adapter (adapters sold separately)"Apple's Lightning Digital AV Adapter plus an HDMI cable
iPhone 15, 16, 17 and their Pro models"USB-C connector with support for: Charging, DisplayPort, USB 2" (Pro models list USB 3)"Up to 4K HDR through native DisplayPort output over USB-C or USB-C Digital AV Adapter"; the support article says "up to 4K resolution and 60Hz"A USB-C to HDMI cable or adapter supporting HDMI 2.0, or Apple's USB-C Digital AV Multiport Adapter
iPhone 18 Pro, iPhone DuoUSB-CListed by Apple among the models that "support connecting to external displays using the USB-C connector"A USB-C to HDMI cable or adapter supporting HDMI 2.0
iPhone 16e, iPhone 17eUSB-CExcluded by name from Apple's list of models that support external displays over USB-C. Apple says such models "can mirror and play content using AirPlay"No wired path documented by Apple
iPhone Air"USB-C connector with support for: Charging, USB 2" — no DisplayPort lineUnconfirmed. Its spec page carries no video-out line and Apple's USB-C display list does not name itNot stated by Apple either way
iPad 9th gen, iPad Air 3rd gen, iPad mini 5th gen, iPad Pro 10.5-inch"Lightning connector""Up to 1080p through Lightning Digital AV Adapter and Lightning to VGA Adapter (adapters sold separately)"Apple's Lightning Digital AV Adapter plus an HDMI cable
iPad Pro 2018 (11-inch 1st gen, 12.9-inch 3rd gen), iPad Air 4th gen"USB-C connector""Up to 4K through USB-C Digital AV Multiport Adapter and USB-C VGA Multiport Adapter (adapters sold separately)"A USB-C to HDMI adapter or cable
iPad Air 5th gen (M1) and later Airs"USB-C port with support for: Charging, DisplayPort, USB 3""Supports one external display with up to 6K resolution at 60Hz"; "Native DisplayPort output over USB-C"A USB-C to HDMI cable; Apple adds that "VGA, HDMI, and DVI output supported using adapters (sold separately)"
iPad mini 6th gen and later, iPad 10th gen and later"USB-C connector"Current models: "Supports one external display with up to 4K resolution at 60Hz"A USB-C to HDMI cable
iPad Pro with Thunderbolt (M1 and later)"Thunderbolt / USB 4 connector""Supports one external display with up to 6K resolution at 60Hz"; the current model adds "or up to 5K resolution at 120Hz"A USB-C to HDMI cable, or DisplayPort if your projector takes it

What the iPhone numbers actually mean

Two details on those spec pages are worth pulling out, because they are the two things people get wrong in opposite directions.

The first is that the USB-C iPhone video-out line is identical on the base and the Pro models. Word for word identical. The only difference Apple prints is the data-transfer bullet, USB 2 at up to 480Mb/s on the base phones against USB 3 at up to 10Gb/s on the Pro. Apple nowhere connects that difference to video output, so if someone tells you a Pro projects a better picture over a cable, that is not an Apple claim.

The second is a genuine contradiction in Apple's own pages, and we would rather show it to you than pick a side quietly. The spec line says "Up to 4K HDR", and the very same page carries a footnote reading "Standard dynamic range video content only." The support article on the USB-C connector resolves it towards HDR: "If your display or TV supports HDR, this output includes content in HDR10 or Dolby Vision." For projection work the point is mostly academic, since very little of this ends up HDR on a wall, but the conflict is real and it is Apple's.

Also note where the 60Hz figure lives. No iPhone technical-specification page states a refresh rate for external output at all. The only Apple sources for 60Hz are the support article and the adapter's own product page.

Mirroring versus a true external display

This is the distinction that decides whether a projection app is usable, and almost nothing written about iPhone-to-projector mentions it.

By default, a connected display is a mirror. Apple's support article is blunt: "When you connect an external display, it mirrors the built-in display of your iPhone." It then gives the exception in the next sentence: "This doesn't apply if you're using an app with a second-screen experience, like a video app." Apple's developer documentation describes the same fork: "When an external display connects, the system mirrors your app's primary display, or, on compatible iPad models with extended display enabled, presents your app's interactive windows on the external display."

A mirror is the wrong thing for a projected show. Everything on your phone goes on the wall, including the app's toolbars, your sliders and handles, notification banners and the time. A mapped projection has to land as a clean edge-to-edge image or the illusion collapses.

The second-screen path is what Apple provides instead, and it is an app-level capability, not a setting you can switch on yourself. Apple's documentation for it says that scenes with the non-interactive external-display role "present noninteractive windows on connected displays" and that "When an app presents content for this scene, it spans the full screen." Apple's own example is exactly this shape: "a game might show its content on a connected display and show game controls on the built-in screen."

  • Mirroring is the system default and needs nothing from the app. The projector shows a copy of your screen, UI and all.
  • A second-screen experience is something the app has to implement. Apple's words: the external content "spans the full screen", and the app keeps its own controls on the device.
  • One Big Projector takes the second route. You keep the editor, the corner handles and the layer controls on the iPhone, iPad or Mac in your hands, and the projector gets the mapped output on its own.
  • An app can ask for a different resolution on that display, but only on the non-interactive path. Apple: screen objects "support changing that mode when they display content for a scene with the windowExternalDisplayNonInteractive role", and "Don't attempt to change the mode of a screen for a scene with the windowApplication role."
  • Apple does not say mirroring stops once an app provides external content. The documentation describes the two behaviours without stating that one replaces the other, so we are not going to claim it does.

What iPadOS adds, and what it does not

iPad is where the forum answers go furthest wrong, because people conflate Stage Manager with video out. They are separate things.

Video out is a property of the port, and every USB-C iPad has it. Stage Manager is a windowing feature, and Apple publishes two different model lists for it: one for iPads that can use Stage Manager at all, and a shorter one for iPads that can "move apps and windows to an external display". The second list is the extended-workspace case, and it is restricted to iPad Air 5th generation and later Airs, iPad Pro 11-inch 3rd generation and later, and iPad Pro 12.9-inch 5th generation and later.

So an iPad mini or a base iPad can run Stage Manager on its own screen and still not get a separate workspace on the projector. Apple never prints the sentence "these iPads mirror only", which is why we will not put it in quotation marks, but the shorter list is the closest thing Apple publishes to it. Its older spec pages label the whole capability "Video mirroring and video out support", which points the same way.

None of this limits an app that drives the display itself. The second-screen path above is not Stage Manager and does not depend on it.

The Mac: which ports actually carry video

A Mac is the easiest of the three to plug into a projector, and the one where people most often use the wrong socket. Two kinds of port can carry video, and on some Macs there are USB-C ports that cannot.

The straightforward case is a built-in HDMI socket. The MacBook Pro and the Mac mini both list an "HDMI port" among their connections, so a projector goes in with one cable and nothing else. The MacBook Air and the iMac list no HDMI port at all, so those need a USB-C to HDMI cable or adapter.

The other route is DisplayPort carried over a Thunderbolt or USB-C port, which every current Mac has. Apple's specification pages describe it as native DisplayPort: the MacBook Air's "Thunderbolt 4 (USB-C) ports support native DisplayPort 1.4 speeds (up to HBR3) with DSC capability", and the Thunderbolt 5 MacBook Pros "support native DisplayPort 2.1 speeds". That is what a USB-C to HDMI cable is converting.

Where this bites is that not every USB-C port on a Mac is a video port. Apple states it outright for one model: on the Mac Studio with M5 Max, "The two USB-C ports on the front of Mac Studio with M5 Max don't support external display connections." Apple's Mac Studio article also groups ports, so on the M5 Ultra some displays must be split across a front group and a back group.

  • Built-in HDMI: MacBook Pro and Mac mini. One cable, straight into the projector.
  • Thunderbolt or USB-C with DisplayPort: every current Mac, including the models with no HDMI socket.
  • Adapter rule, in Apple's words: "the adapter must be compliant with DisplayPort Alt Mode, Thunderbolt 3, or Thunderbolt 4." A USB-C cable that only charges will not do it.
  • VGA on an old projector: Apple's iMac guide names the parts as a "USB-C VGA Multiport adapter and the cable that came with your display or projector", and its own VGA adapter page states "display resolutions up to 1080p (1920 x 1080) at 60Hz".
  • Not every USB-C port: on Mac Studio with M5 Max the two front USB-C ports are documented as not supporting displays. Apple does not publish the same statement for other Macs, so check your model's own article rather than assuming either way.

Mac by chip: how many displays, and at what resolution

Apple publishes Mac display limits per chip, not per model name, in a set of support articles titled "How many displays can be connected to" each machine. That is why two MacBook Pros that look identical can differ: the number follows the chip inside.

The figures below are quoted from those articles. Each one carries a published date rather than a macOS version, and none of them names a macOS release the numbers apply to, so treat them as current-as-of-publication rather than tied to a particular system version. The MacBook Pro pages are dated 5 November 2026, the Mac mini and Mac Studio pages 21 September 2026, and the MacBook Air page 10 March 2026.

For projection, the count matters less than it looks. You almost certainly want one display, the projector, so the useful column is the single-display ceiling. A base M-series laptop already reaches "Up to 8K (7680 x 4320) at 60Hz over Thunderbolt or HDMI" on one display, which is far beyond any projector most people will put in front of it. The counts matter when the projector is a second or third screen alongside monitors you already use.

One caveat Apple repeats on every one of these articles, and it explains a lot of confused forum posts: "Available scaled resolutions for external displays in Displays settings might vary by available system resources and type of connected displays. Scaled resolutions greater than the macOS default are not reflected in the maximum support shown here."

Mac and chipPorts that carry videoExternal displays Apple statesApple's stated ceiling
MacBook Air, M4 or M5Thunderbolt 4 only; no HDMI port listed"up to two external displays simultaneously in addition to the built-in display"One display "8K (7680 x 4320) at 60Hz, 5K (5120 x 2880) at 120Hz, or 4K (3840 x 2160) at 240Hz"; two displays "6K (6144 x 3456) at 60Hz or 4K (3840 x 2160) at 144Hz"
MacBook Pro, M5Thunderbolt and HDMI"up to two external displays simultaneously with the built-in display"One display up to "8K (7680 x 4320) at 60Hz over Thunderbolt or HDMI"; two displays "6K (6144 x 3456) at 60Hz" or "4K (3840 x 2160) at 144Hz" on both
MacBook Pro, M4 or M4 ProThunderbolt and HDMI"up to two external displays simultaneously with the built-in display" (Apple gives base and Pro the same figures here)Same as the M5: one display 8K at 60Hz, 5K at 120Hz or 4K at 240Hz; two displays 6K at 60Hz or 4K at 144Hz
MacBook Pro, M5 ProThunderbolt and HDMI"up to three external displays simultaneously with the built-in display"Three displays "Up to 6K (6144 x 3456) at 60Hz over Thunderbolt or HDMI / or up to 4K (3840 x 2160) at 144Hz"
MacBook Pro, M5 MaxThunderbolt and HDMI"up to four external displays simultaneously with the built-in display"Four displays "Up to 6K (6144 x 3456) at 60Hz over Thunderbolt or HDMI / or up to 4K (3840 x 2160) at 144Hz"
MacBook Pro, M3Thunderbolt and HDMI"up to two displays simultaneously with the lid closed"Lid closed: "One display up to a native resolution of 6K (6144 x 3456) at 60Hz, and one display up to a native resolution of 5K (5120 x 2880) at 60Hz over Thunderbolt"
Mac mini, M6Thunderbolt and HDMI on the back"up to three external displays simultaneously"One display up to "8K (7680 x 4320) at 60Hz over Thunderbolt or HDMI"; a second display over HDMI is listed at "4K (3840 x 2160) at 60Hz over HDMI"
Mac mini, M4 or M4 ProThunderbolt and HDMI on the back"up to three external displays simultaneously over Thunderbolt or HDMI"M4 Pro, three displays: "Up to 6K (6144 x 3456) at 60Hz … or up to 4K (3840 x 2160) at 144Hz over Thunderbolt or HDMI"
Mac mini, M2Thunderbolt and HDMI on the back"up to two external displays simultaneously"One display "6K (6144 x 3456) at 60Hz over Thunderbolt or up to 4K (3840 x 2160) at 60Hz over HDMI"
Mac Studio, M5 MaxThunderbolt 5 and HDMI on the back; the two front USB-C ports do not support displays"up to five displays simultaneously"Four at "6K (6144 x 3456) at 60Hz over Thunderbolt" plus a fifth at "5K (5120 x 2880) at 60Hz over HDMI"
Mac Studio, M5 Ultra or M3 UltraTwo port groups, each covering some of the Thunderbolt ports plus HDMI"up to eight displays simultaneously"Eight at "6K (6144 x 3456) at 60Hz or 4K (3840 x 2160) at 144Hz over Thunderbolt or HDMI"
iMacThunderbolt only; no HDMI port listedTwo-port model: "One external display". Four-port model: "Two external displays""up to 6K resolution at 60 Hz or 4K resolution at 165 Hz" per display; the four-port model can instead drive "one external display with up to 8K resolution at 60 Hz"

Closing the laptop lid: what it does and does not buy you

This is the Mac question with the most stale advice attached to it, because Apple's answer changed and the old answer is still all over the web.

On current Apple silicon laptops, closing the lid buys you nothing. Apple says so in one sentence on each article, for example: "Closing the lid of your MacBook Pro with M5 chip will not increase the number of external displays that can be supported." The same sentence, with the chip name swapped, appears for M5 Pro, M5 Max, M4 and M4 Pro, and for the MacBook Air with M4 or M5.

The clamshell trick is real, but it is specific to the M3 generation, where the base chip could drive two external displays only with the lid shut. Apple's dual-monitor article for those machines lists what it needs: an "External keyboard and mouse or trackpad", "macOS Sonoma 14.3 or later (MacBook Air) or macOS Sonoma 14.6 or later (MacBook Pro)", and "Display power via USB-C or power adapter with USB-C to MagSafe Cable". It adds a consequence worth knowing before a show: "If you open the laptop lid when both displays are connected, the secondary external display will go dark or disconnect."

For projection work the practical reading is simpler. You are driving one display, so you do not need the lid shut at all, and closing it will not raise a limit you are nowhere near. If you do work with the lid closed, Apple's troubleshooting page sets the conditions: "make sure that the Mac is connected to power and using an external keyboard and mouse."

Mirroring versus extending on a Mac

On the Mac this is a visible setting rather than something an app has to implement, which makes it easier to get right than on iPhone and easier to get wrong by accident.

Apple describes the two options plainly. Mirroring: "You can use video mirroring to show your entire desktop on each display." Extending: "You can extend your desktop across two or more displays, and choose which display shows the Finder and application menu." The control lives in System Settings under Displays, in the "Use as" pop-up menu, which Apple documents as "Choose whether your display mirrors or extends your desktop, or acts as your main display."

For a projected image the difference is the whole thing. Mirror your desktop and the projector gets your menu bar, your Dock, your wallpaper and every window you open, scaled to whichever display the Mac is compromising for. Apple even documents the compromise: the "Optimize for" control "appears only when you are mirroring your display to an external display", because while mirroring, one picture has to suit two screens.

Extend instead, and the projector becomes its own screen that an app can fill edge to edge while you keep your controls on the Mac's own display. That is the Mac equivalent of the second-screen behaviour described earlier for iPhone and iPad, and it is how One Big Projector is meant to be run on a Mac: the editor stays in front of you, the mapped output goes to the projector alone.

  • Mirror when you want someone to see what you are doing, and accept the interface on the wall.
  • Extend for any real projection: it is the only way the wall gets a clean image.
  • Pick which screen is primary in the same settings. Apple's "Use as" menu includes acting "as your main display", which is what moves the menu bar off the projected screen.
  • Mirroring is not neutral for quality, since Apple's own "Optimize for" control exists precisely because a mirrored picture is optimised for one display or the other.
  • Apple does not document what happens to a full-screen app window on an extended projector, so nothing on this page claims a specific behaviour there.

Mac-specific things that go wrong

Apple has one support article for a dark or low-resolution external display, and it is the most useful page in this whole subject because it lists the causes rather than making you guess.

Two of them are about asking for more than the chain can carry. "Your external display will be dark or use a lower resolution or refresh rate if your video cable or any adapter you may be using with it doesn't support the resolution and refresh rate of the display", and "Your external display will be dark if it exceeds the maximum number of external displays that your Mac can use at the same time." A cheap adapter and an over-full display count produce the same symptom.

The scaling question is the other common one, and Apple's answer is more direct than the forums are: "If the display is working but its picture seems blurry, try changing the resolution. The display's default, native resolution might be sharper than a scaled resolution." In Displays settings, Apple documents a "Default" option that will "automatically use the best resolution for the display", and a "Show all resolutions" option to "View all available resolutions, including low-resolution modes." So if your projector's native mode is not in the short list, that switch is where to look. Apple warns in the same guide that "Using a scaled resolution may affect performance."

There is also a modern gotcha that catches people once: "When connecting a display to a Mac laptop computer with Apple silicon, your Mac might ask you to allow this accessory (your display) to connect. If you don't allow it to connect, your display remains dark." If you dismissed that prompt in a hurry before a show, that is your black screen.

  • Nothing appears: Apple's steps are to disconnect the display from the Mac and its power and reconnect, sleep and wake the Mac, then "Press and hold the Option key to show the Detect Displays button, then click the button."
  • Blurry image: try the native resolution rather than a scaled one, which is Apple's own first suggestion.
  • Your projector's resolution is missing: turn on "Show all resolutions", and note Apple's advice to "Control-click the thumbnail view and choose Show List" to read them properly.
  • You picked a mode the projector cannot show: Apple says to "Wait 15 seconds to see if your Mac resets the display resolution on its own", and if not, "press Esc (Escape) to revert your display to the previously selected resolution."
  • It only mirrors and will not extend: Apple's note is to connect the display directly rather than through a hub, since "If your display is connected to a hub or dock and you can use it only to mirror your built-in display, connect your display to a port directly on your Mac."
  • Plugging in several screens: "When connecting more than one display, connect the display with the highest resolution first."

What does not work

Stated plainly, because this is the part people find out the expensive way.

The single biggest one is the first item below. There is a whole category of accessory sold as an iPhone projector, and there is no iPhone that throws light out of itself. You are always buying or borrowing a projector as well.

  • No Apple device is a projector. Not an iPhone, not an iPad, not a Mac. They output a video signal; a projector turns a signal into light on a wall.
  • A plain USB-C to USB-C charging cable will not do it. Apple notes that "The USB-C cable that comes with your iPhone supports charging and USB 2 speeds." For a high-resolution display Apple says to use a cable that supports USB 3.1 or higher.
  • A Lightning iPhone or iPad cannot be made to do 4K. Apple's ceiling for every Lightning model is "Up to 1080p", through its own adapters.
  • A third-party Lightning-to-HDMI dongle is not covered by anything Apple publishes. The only Lightning video adapters Apple documents are its own two.
  • iPhone 16e and 17e have no documented wired display path. Apple excludes them by name and points such models at AirPlay instead.
  • AirPlay is not a substitute for a cable here. It needs an Apple TV or an AirPlay-enabled display at the other end; a generic HDMI projector is not one.
  • Mirroring will not give you a clean image. Your toolbars, handles and notifications land on the wall with everything else. That is what the second-screen path exists to avoid.
  • Stage Manager is not video out, and a model that is missing from Apple's shorter list does not gain an extended workspace by turning it on.
  • Closing a current MacBook's lid adds nothing. Apple states plainly that it "will not increase the number of external displays that can be supported" on M4 and M5 machines.
  • A front USB-C port is not always a display port. Apple documents the two front ports on the Mac Studio with M5 Max as not supporting external displays.

Once it is connected: distance and image size

The cable question settles whether you get a picture. Where to stand the projector settles whether that picture covers the window, the wall or the whole house front, and that is pure arithmetic on your projector's throw ratio rather than anything to do with your phone.

We have a separate tool for it rather than a paragraph of formulas here. Put in your throw ratio and either the distance you have or the image width you want, and it gives you the rest with the formula shown. The link is below.

The other half of that problem is getting the image to sit exactly on an irregular surface once the projector is placed, which is what corner pinning and mesh warping are for. One Big Projector lets you design the whole scene and preview it in AR on the real wall before a projector is connected at all, which is a cheap way to find out your planned spot is too close.

What we could not confirm

Keeping this list honest is more useful than filling the gaps with plausible guesses, so here is everything we wanted to write and could not source at Apple.

The iPhone Air is the big one. Its specification page has no video-out line and no DisplayPort bullet under USB-C, and Apple's list of models that support external displays over USB-C does not name it. That is Apple being silent, not Apple saying no, so the table says unconfirmed rather than guessing in either direction.

We also cut: any refresh-rate figure for Lightning-era devices, because those pages give a resolution and no Hz at all; any claim that the Pro iPhones output better video than the base models, which no Apple page supports; any statement that non-Stage-Manager iPads mirror only, which Apple never prints; and any claim that an app providing external content stops the system mirroring, which the developer documentation does not say.

The Mac cuts are listed separately below, because there are as many of them and they are the ones most likely to be quoted back at us from somewhere else.

Everything else on this page is a quote or a direct paraphrase of a line on an Apple page, and the sources note at the end names which page each one came from.

  • No macOS version is attached to any Mac figure. Apple's per-chip display articles carry a published date and never name a system release, so neither do we.
  • HDMI 2.1 and 8K-over-HDMI for MacBook Pro: cut. Those lines are not on Apple's current specification pages.
  • A general clamshell requirements list: cut. Apple's old closed-display-mode article now redirects elsewhere, so the only requirements quoted here are the ones on the M3 dual-monitor article and the troubleshooting page.
  • The front-port restriction beyond Mac Studio with M5 Max: cut. Apple documents it for that configuration only, so we did not extend it to the Mac mini's front USB-C ports.
  • "More Space" as the name of a scaled resolution option: cut. Apple documents "Larger Text" and never names a "More Space" control.
  • That a Mac auto-selects an external display's native resolution: cut. Apple says it "automatically uses the best resolution for the display", which is not the same sentence, so we quote only what it says.
  • Projector-specific guidance from any Mac page: there is none. The word projector appears only on Apple's adapter pages.

Questions

Can an iPhone connect to a projector?

Yes, over a cable, if the projector has an HDMI or USB-C input. On iPhone 15 and later, Apple says the phone "uses the DisplayPort protocol to support connections to USB-C displays at up to 4K resolution and 60Hz", and that an HDMI 2.0 adapter or cable can output 4K at 60Hz. On a Lightning iPhone, Apple's limit is "Up to 1080p" through its Lightning Digital AV Adapter. The iPhone is the source of the video; the projector is separate hardware.

Which iPhones have USB-C and which need a Lightning adapter?

Apple's spec pages print "Lightning connector" for iPhone 14 and earlier, and "USB-C connector" from iPhone 15 onwards. So iPhone 11 through 14 Pro need Apple's Lightning Digital AV Adapter, and iPhone 15, 16 and 17 and their Pro models can use a USB-C to HDMI cable. iPhone 16e and 17e are excluded by name from Apple's list of models supporting external displays over USB-C.

Do I need Apple's own adapter, or will a cheap USB-C to HDMI cable work?

Apple's support article says a third-party cable is fine: "Adapters and cables that support HDMI 2.0 can output video from your iPhone at 4K resolution and 60Hz." Apple's own USB-C Digital AV Multiport Adapter is listed at the same ceiling, "up to 4K resolution and 60Hz", and adds a USB-C port you can plug a charger into. For Lightning iPhones, the only video adapters Apple documents are its own.

What resolution can an iPad send to a projector?

It depends on the model. Lightning iPads are "Up to 1080p" through Apple's adapters. The 2018 iPad Pro and iPad Air 4th generation say "Up to 4K" through a USB-C adapter. From iPad Air 5th generation onward Apple states "Supports one external display with up to 6K resolution at 60Hz", while the current iPad mini and base iPad say "up to 4K resolution at 60Hz". Your projector's own input will usually be the real ceiling.

Why does my projector show the app's buttons instead of a clean image?

Because it is mirroring. Apple states that "When you connect an external display, it mirrors the built-in display of your iPhone", unless you are using an app with a second-screen experience. An app that implements the external-display path puts full-screen content on the projector while keeping its controls on the device. One Big Projector works that way, so the editor handles stay on your phone and the projector gets only the mapped output.

Is Stage Manager needed to use a projector with an iPad?

No. Video out comes from the port and works on any USB-C iPad. Stage Manager is a separate windowing feature, and Apple publishes a shorter list of iPads that can move apps and windows to an external display than of iPads that can run Stage Manager at all. An app that drives the display itself does not depend on either list.

Can I charge the phone while it is projecting?

With the right adapter, yes. Apple's iPhone User Guide says of its video adapters that "The adapters have an extra port so you can connect the charging cable and charge your iPhone while connected to a monitor, TV, or projector." For the USB-C Digital AV Multiport Adapter, Apple says "You can also connect a charging cable to the USB-C port to charge your Mac, iPad, or iPhone." A bare USB-C to HDMI cable has no such port.

How do I connect a MacBook to a projector?

If it is a MacBook Pro, use the built-in HDMI port and one HDMI cable. A MacBook Air has no HDMI port, so use a USB-C to HDMI cable or adapter on a Thunderbolt port. Apple's requirement for the adapter is that "the adapter must be compliant with DisplayPort Alt Mode, Thunderbolt 3, or Thunderbolt 4." Then open System Settings, click Displays, and set the "Use as" menu to extend rather than mirror if you want a clean full-screen image.

How many external displays can my Mac drive?

Apple publishes this per chip. A MacBook Air with M4 or M5 supports "up to two external displays simultaneously in addition to the built-in display"; a MacBook Pro with M5 the same; M5 Pro three; M5 Max four. A Mac mini with M6, M4 or M4 Pro supports "up to three external displays simultaneously", and a Mac Studio with M5 Max five. For a projector you are using one display, so the single-display ceiling is the number that matters, and Apple puts that at up to 8K at 60Hz on current machines.

Does closing my MacBook's lid let me connect another display?

Not on current models. Apple states that "Closing the lid of your MacBook Pro with M5 chip will not increase the number of external displays that can be supported", and says the same for M5 Pro, M5 Max, M4, M4 Pro and the M4 and M5 MacBook Air. The clamshell trick belongs to the M3 generation, where Apple documents two external displays with the lid closed, requiring an external keyboard and mouse, mains or display power, and macOS Sonoma 14.3 or later.

Why is my projector blurry or showing the wrong resolution from my Mac?

Apple's first suggestion is the resolution itself: "If the display is working but its picture seems blurry, try changing the resolution. The display's default, native resolution might be sharper than a scaled resolution." If the projector's native mode is not listed, Apple documents a "Show all resolutions" option that will "View all available resolutions, including low-resolution modes." Apple also notes that a cable or adapter that does not support the resolution can make a display dark or drop it to a lower mode.

Is the iPhone itself a projector?

No, and no iPhone, iPad or Mac has ever been one. The device generates the picture and sends it down a cable; a projector is a separate piece of hardware with a lamp or laser and a lens that turns that signal into light on a surface. An app like One Big Projector designs and maps what gets sent, including an AR preview on your real wall before any projector is plugged in.

Sources, and which claim came from where. Apple Support, Charge and connect with the USB-C connector on your iPhone (https://support.apple.com/en-us/105099) for the list of iPhone models that "support connecting to external displays using the USB-C connector" and the exclusion of iPhone 16e and 17e, for "Adapters and cables that support HDMI 2.0 can output video from your iPhone at 4K resolution and 60Hz", for "iPhone uses the DisplayPort protocol to support connections to USB-C displays at up to 4K resolution and 60Hz", for the Apple USB-C Digital AV Multiport Adapter outputting "up to 4K resolution and 60Hz" and the HDR10 or Dolby Vision sentence, for "When you connect an external display, it mirrors the built-in display of your iPhone" and the second-screen exception, for AirPlay being the fallback on unsupported models, and for the supplied USB-C cable supporting "charging and USB 2 speeds" with USB 3.1 or higher advised for high-resolution displays. Apple iPhone technical specifications, iPhone 13 (https://support.apple.com/en-us/111872), iPhone 11 (https://support.apple.com/en-us/111865), iPhone 12 (https://support.apple.com/en-us/111876), iPhone 14 (https://support.apple.com/en-us/111850) and iPhone 14 Pro (https://support.apple.com/en-us/111849) for "Lightning connector" and "Up to 1080p through Lightning Digital AV Adapter and Lightning to VGA Adapter (adapters sold separately)", and for the "Standard dynamic range video content only." footnote. iPhone 15 (https://support.apple.com/en-us/111831), iPhone 15 Pro (https://support.apple.com/en-us/111829), iPhone 16 (https://support.apple.com/en-us/121029), iPhone 16 Pro (https://support.apple.com/en-us/121031), iPhone 17 (https://support.apple.com/en-us/125089) and iPhone 17 Pro (https://support.apple.com/en-us/125090) for the "USB-C connector with support for: Charging, DisplayPort, USB 2 / USB 3" bullets, for "Up to 4K HDR through native DisplayPort output over USB-C or USB-C Digital AV Adapter (model A2119; adapter sold separately)", for that line being identical on base and Pro models, and for the same SDR footnote appearing alongside it. iPhone Air (https://support.apple.com/en-us/125092) for its USB-C bullets listing only charging and USB 2, with no DisplayPort line and no video-out line at all. Apple iPad technical specifications, iPad 9th generation (https://support.apple.com/en-us/111898), iPad Air 3rd generation (https://support.apple.com/en-us/111939), iPad mini 5th generation (https://support.apple.com/en-us/111904) and iPad Pro 10.5-inch (https://support.apple.com/en-us/111927) for "Lightning connector" and the 1080p line; iPad Pro 12.9-inch 3rd generation (https://support.apple.com/en-us/111979), iPad Pro 11-inch 1st generation (https://support.apple.com/en-us/111974) and iPad Air 4th generation (https://support.apple.com/en-us/111905) for "USB-C connector" and "Up to 4K through USB-C Digital AV Multiport Adapter and USB-C VGA Multiport Adapter (adapters sold separately)"; iPad Air 5th generation (https://support.apple.com/en-us/111887) for "Supports one external display with up to 6K resolution at 60Hz", "Native DisplayPort output over USB-C" and "VGA, HDMI, and DVI output supported using adapters (sold separately)"; iPad mini 6th generation (https://support.apple.com/en-us/111886) and iPad 10th generation (https://support.apple.com/en-us/111840) for "USB-C connector"; iPad Pro 11-inch 4th generation (https://support.apple.com/en-us/111842) for "Thunderbolt / USB 4 connector" and the 6K at 60Hz line; and the current iPad Pro (https://www.apple.com/ipad-pro/specs/), iPad Air (https://www.apple.com/ipad-air/specs/), iPad mini (https://www.apple.com/ipad-mini/specs/) and iPad (https://www.apple.com/ipad-11/specs/) specification pages for the current 6K at 60Hz, 5K at 120Hz and 4K at 60Hz figures. Apple Support, Use Stage Manager on your iPad (https://support.apple.com/en-us/105075) for the two model lists, including the shorter list of iPads that can "move apps and windows to an external display". Apple Support, Connect iPad to a display with a cable (https://support.apple.com/guide/ipad/connect-to-a-display-with-a-cable-ipadf1276cde/ipados) and Connect iPhone to a display with a cable (https://support.apple.com/guide/iphone/connect-to-a-display-with-a-cable-iph93af723b9/ios) for the step-by-step wiring and for "The adapters have an extra port so you can connect the charging cable and charge your iPhone while connected to a monitor, TV, or projector." Apple, Lightning Digital AV Adapter (https://www.apple.com/shop/product/mw2p3am/a/lightning-digital-av-adapter) for mirroring to a "TV, display, projector, or other compatible display in up to 1080p HD", and USB-C Digital AV Multiport Adapter (https://www.apple.com/shop/product/mw5m3am/a/usb-c-digital-av-multiport-adapter) for the 3840x2160 at 60Hz device list and for charging through the adapter's USB-C port. Apple Developer, Presenting content on a connected display (https://developer.apple.com/documentation/uikit/presenting-content-on-a-connected-display) for "When an external display connects, the system mirrors your app's primary display, or, on compatible iPad models with extended display enabled, presents your app's interactive windows on the external display", for the non-interactive external-display scene presenting windows that span the full screen, for the game-with-controls-on-the-built-in-screen example, and for screen modes being changeable only on the non-interactive path. Apple Developer, UISceneSession.Role.windowExternalDisplayNonInteractive (https://developer.apple.com/documentation/uikit/uiscenesession/role-swift.struct/windowexternaldisplaynoninteractive) for "A scene that displays noninteractive windows on an externally connected display." Apple, Mac specification pages for MacBook Air (https://www.apple.com/macbook-air/specs/), MacBook Pro (https://www.apple.com/macbook-pro/specs/), Mac mini (https://www.apple.com/mac-mini/specs/) and iMac (https://www.apple.com/imac/specs/) for which models list an "HDMI port" and which do not, for "Thunderbolt 4 (USB-C) ports support native DisplayPort 1.4 speeds (up to HBR3) with DSC capability" and the Thunderbolt 5 models' "native DisplayPort 2.1 speeds". Apple's per-chip display-support articles for every figure in the Mac table and the lid-closed section: MacBook Pro index (https://support.apple.com/en-us/101571) and its per-chip pages for M5 (https://support.apple.com/en-us/149463), M5 Pro (https://support.apple.com/en-us/149461), M5 Max (https://support.apple.com/en-us/149458), M4 and M4 Pro (https://support.apple.com/en-us/149474) and M3 (https://support.apple.com/en-us/149477); MacBook Air with M4 and M5 (https://support.apple.com/en-us/122212); Mac mini index (https://support.apple.com/en-us/102194) and its pages for M6 (https://support.apple.com/en-us/148370), M4 (https://support.apple.com/en-us/148271), M4 Pro (https://support.apple.com/en-us/149071), M5 Pro (https://support.apple.com/en-us/149070), M2 (https://support.apple.com/en-us/148273) and M2 Pro (https://support.apple.com/en-us/149072); Mac Studio index (https://support.apple.com/en-us/101910) and its pages for M5 Max (https://support.apple.com/en-us/148405), M5 Ultra (https://support.apple.com/en-us/148406) and M3 Ultra (https://support.apple.com/en-us/148505). Those same pages carry "Closing the lid of your MacBook Pro with M5 chip will not increase the number of external displays that can be supported" and its equivalents, the Mac Studio M5 Max statement that "The two USB-C ports on the front of Mac Studio with M5 Max don't support external display connections", the Mac Studio port groups, the published dates quoted on the page, and the repeated note that "Scaled resolutions greater than the macOS default are not reflected in the maximum support shown here." Apple Support, Use dual monitors with your MacBook Air and MacBook Pro with M3 chip (https://support.apple.com/en-us/117373) for the lid-closed requirements, the external keyboard and mouse, the macOS Sonoma 14.3 or 14.6 minimum, the display-power or MagSafe requirement, and "If you open the laptop lid when both displays are connected, the secondary external display will go dark or disconnect." Apple, iMac User Guide: Connect additional displays (https://support.apple.com/guide/imac/connect-additional-displays-apd22d9b4f8e/mac) for the two-port and four-port iMac display counts and their "up to 6K resolution at 60 Hz or 4K resolution at 165 Hz" and 8K figures, and for the VGA and DVI "display or projector" adapter rows. Apple, USB-C VGA Multiport Adapter (https://support.apple.com/en-us/111815) for "It supports display resolutions up to 1080p (1920 x 1080) at 60Hz." Apple Support, Adapters for the Thunderbolt or USB-C port on your Mac (https://support.apple.com/en-us/102477) and If your external display is dark or low resolution (https://support.apple.com/en-us/102501) for "the adapter must be compliant with DisplayPort Alt Mode, Thunderbolt 3, or Thunderbolt 4." Apple Support, If your external display is dark or low resolution (https://support.apple.com/en-us/102501) for the dark-or-lower-resolution causes including an unsupported cable or adapter and exceeding the maximum number of displays, for "If the display is working but its picture seems blurry, try changing the resolution. The display's default, native resolution might be sharper than a scaled resolution", for the Detect Displays and reconnect steps, for the closed-lid power and keyboard condition, for the hub-only-mirrors note, and for "When connecting a display to a Mac laptop computer with Apple silicon, your Mac might ask you to allow this accessory (your display) to connect. If you don't allow it to connect, your display remains dark." Apple Support, Connect displays to your Mac (https://support.apple.com/en-us/102555) for "When connecting more than one display, connect the display with the highest resolution first." Apple, Extend or mirror your Mac desktop across multiple displays (https://support.apple.com/guide/mac-help/extend-mirror-mac-desktop-multiple-displays-mchlb5f905a1/mac), Displays settings on Mac (https://support.apple.com/guide/mac-help/displays-settings-on-mac-mh40768/mac) and Change your display's resolution (https://support.apple.com/guide/mac-help/change-your-displays-resolution-mchl86d72b76/mac) for "You can use video mirroring to show your entire desktop on each display", "You can extend your desktop across two or more displays, and choose which display shows the Finder and application menu", the "Use as" pop-up menu and its "acts as your main display" option, "Optimize for" appearing "only when you are mirroring your display to an external display", the "Default" resolution option that will "automatically use the best resolution for the display", "Show all resolutions" to "View all available resolutions, including low-resolution modes", the Show List instruction, "Using a scaled resolution may affect performance", and the 15-second and Escape-key recovery from an unsupported resolution. Not confirmed, and cut or labelled as such on the page: whether iPhone Air supports wired video out, since Apple publishes no video-out line for it and omits it from the USB-C display list; any refresh-rate figure for Lightning-era iPhones or iPads, as those pages state resolution only; any claim that Pro iPhones output better video over a cable than base models, since the video-out line is identical; any Apple sentence stating that iPads outside the shorter Stage Manager list mirror only, which Apple never prints; any claim that system mirroring stops once an app provides external-display content, which the developer documentation does not state; HDMI 2.1 and 8K-over-HDMI figures for MacBook Pro, which are not on Apple's current specification pages; any macOS version attached to the per-chip Mac display figures, since those articles carry a published date and no system version; any general closed-display-mode requirements list, since Apple's old article on that topic now redirects to Connect displays to your Mac and the current page has no closed-display section; the front-USB-C-port display restriction for any Mac other than the Mac Studio with M5 Max, which is the only configuration Apple documents it for; "More Space" as a named scaled-resolution control, since Apple documents only "Larger Text"; any claim that a Mac automatically selects an external display's native resolution, as against Apple's actual wording that it "automatically uses the best resolution for the display"; any Apple explanation of what the "Optimize for" control does beyond the one sentence quoted; any Apple statement about how a full-screen app window behaves on an extended external display on macOS; and any projector-specific resolution guidance for a Mac, since the word projector appears only on Apple's adapter pages and the iMac guide's adapter rows. Figures for chip tiers whose Apple article we did not read, including M6 and M4 Max MacBook Pros, M2 and M3 Max, M2 Ultra and the Mac Pro, are omitted rather than inferred from neighbouring tiers. The 4K HDR spec line and the "Standard dynamic range video content only." footnote contradict each other on the same Apple page; both are quoted rather than resolved silently.

Work out your throw distance and image size

Get One Big Projector on the App Store

More about One Big Projector · Contact us